GENERAL INFORMATION
|
|
| Model Type |
E-Book |
|
| Model Name |
EBK-350S |
|
|
AC INPUT
|
|
| AC Input Voltage |
100V +20% / -15% at line input, 110V / 115V +/- 20% at line input |
|
| AC Input Frequency |
50 or 60 Hz+/-10% (auto sensing) |
|
|
OUTPUT
|
|
| Output Capacity |
350VA |
|
| Output By Pass Capacity |
400VA |
|
| Output No Of Sockets |
3 UPS Sockets and 1 Bypass Socket |
|
| Output Voltage On Battery |
Simulated sine wave at 100V ro 110V/115V or 200V/240V +/- 5% |
|
| Output Transfer Time |
2/4 milliseconds, including detection time |
|
|
PROTECTION
|
|
| Protection Overload |
UPS automatic shutdown if overload exceeds 105% of nominal at 20 sec, 120% at 10 sec, and 130% at 3 sec |
|
| Protection Unit |
Fuse for overload & short circuit protection |
|
| Protection Short Protection |
UPS output cut off immediately |
|
|
BATTERY
|
|
| Battery Type |
Sealed, Maintenance-free lead acid, with 3 - 6 years typical lifetime |
|
| Battery Typical |
4 hours |
|
| Battery Protection |
Automatic self-test & over discharge protection, short circuit protection by fuse |
|
| Battery LED Indicator |
Battery Check |
|
|
PHYSICAL
|
|
| Physical Weight kgs |
5.8 |
|
| Physical Weight lbs |
12.5lb |
|
| Physical Dimension mm |
250x200x50 |
|
| Physical Dimension inch |
9.8 |
|
|
|
|
ALARM
|
|
| Alarm Battery Backup |
Slow beeping sound every 4 seconds |
|
| Alarm Battery Low |
Rapid beeping sound every second |
|
| Alarm Overload |
Continue beeping sound, Overload LED always On |
|
| Alarm Battery 105% load |
Continue beeping sound every 4 seconds |
|
|
INTERFACE
|
|
| Interface Dry Contact |
Sends battery low & power failure signals, and receives shutdown signal from computer |
|
| Interface RS-232 |
Detect battery low, Schedule UPS on/off, AC input/output power status display |
|
|
ENVIRONMENT
|
|
| Environment Ambient |
3,500 meters max. elevation, 0-95% humidity non-condensing, 0-40 deg c |
|
| Environment Audible |
<40dBA (1 meter from surface) |
|
| ShowOrder |
5 |
|
|
